Leather or synthetic for pads and mitts?

Genuine leather lasts longest under daily pad work and heavy kicks. Synthetic (PU) costs less per piece and takes bright colours and print well. Both are built to the same construction and checked against the same sample.

How is the padding density set?

By the product and how it is used — a focus mitt for fast pad work is padded differently from a Thai pad that takes kicks. The density is confirmed on the sample before bulk production.

Where can our logo go on pads and bags?

Anywhere it stays visible in use: the face of a mitt or pad, the side of a bag or the strap of a kicking shield, by DTF, heat transfer or screen print. Placement is confirmed on your mockup before sampling.

Can focus mitts match our club's gloves?

Yes. One colour reference and one logo treatment carry across mitts, pads, bags and gloves in the same order.

Do you make bag and mitt sets?

Yes. Bags, mitts and gloves can be packed together as one branded set, with your labels and packaging.

What is the minimum order for custom pads and bags?

50 pieces per design — one product in one colourway. Mitts, pads and bags are different products, each with its own patterns and set-up, so they can't be combined to reach 50; a second colourway counts as a new design.

Do you make a sample before bulk production?

Yes, free. After a free mockup, a sample mitt, pad or bag is made so your coaches can feel the padding density and test the straps before bulk production. Bulk starts only after you approve it, and is checked against it. If it needs changes, your first revised sample is free.

How long does a custom pads and bags order take?

The sample is free and delivered in 7–10 days. Bulk production typically takes 4–6 weeks from sample approval, plus courier transit. Your exact dispatch date is confirmed in writing with your quote.

Can we reorder the same equipment later?

Yes. The specification for each piece is stored digitally and the approved samples stay in the workshop, so replacement mitts or extra bags match the ones already on your gym floor. Your dispatch date is confirmed in writing when you place it.

Custom Punch Bags and Focus Mitts Manufacturer

Product types

Pads, bags and mitts for the gym floor

Mitts for coaches, Thai pads and shields for kicks, bags for the floor: each is padded for the work it takes.

Focus mitts and pads
Curved and flat focus mitts for pad work, with a secure hand compartment.
Curved or flat
Punch bags
Hanging, angle and uppercut, double-end and speed bags, sized to your gym.
Sized per order
Thai pads and kicking shields
Forearm-strapped Thai pads and large kicking shields for kicks, knees and power work.
Strap set per use
Paddle mitts and training sticks
Paddle mitts and training sticks for speed, timing and reaction drills.
Light and fast
Bag and mitt sets
Bags, mitts and gloves packed together as one branded set.
Packed as a set

Use cases

Where custom punch bags and pads are used

Gym fit-outs
Bags and pads specified together for a new or refitted gym.
Coaching kit
Mitts, pads and sticks for coaches and pad holders.
Coordinated kit
Equipment in the same colours and branding as the club's gloves.
Private label retail
Brand-owned pads, mitts and bag sets with your labels and packaging.

Punch bags

Filled or unfilled punch bags

The shell, stitching and branding are the same either way. The choice is about freight, and who fills the bag.

Filled

Best for — Gyms that want bags ready to hang on arrival.

Ready to hang straight away
Filling density set and checked on the sample
Heavier to ship
Higher freight cost per bag

Unfilled

Best for — Export orders and buyers who fill bags locally.

Much lighter and smaller to ship
Lower freight cost per bag
Filled at your end to the weight you want
Same shell, stitching and branding

Specification

Custom punch bags and pads: the full specification

What is decided with you first, what the physical sample confirms, and what is fixed before bulk production.

At the brief
Agreed with you before a sample is made.
- ShellGenuine leather, synthetic (PU) or microfibre leather outer, confirmed against your specification before sampling.
- Bag fittingsChains, straps and D-rings for hanging bags, specified per order.
On the sample
Confirmed on the physical sample you approve.
- PaddingPadding density set by the product and how it is used, and confirmed on the sample.
- Straps and handlesHand compartments, forearm straps and handles agreed per product and fitted on the sample.
Before bulk
Fixed before bulk production begins.
- SizesSize and weight per product confirmed before bulk.
Bulk is then made and checked against the approved sample.

Customisation

What you customise

Branding
Logo by DTF, heat transfer or screen print, placed where it stays visible in use.
Colour
Striking face, trim and panel colours against agreed references.
Construction
Padding, straps and fittings specified for the intended use.
Packaging
Mitts and pads in pairs, sets packed together, with your labels and export cartons.

Your design, made

Your custom focus mitt design, made the way you drew it.

Send a sketch, a logo or colour codes. It becomes a mockup you approve, then a sample, and bulk is made to match it.

The finished black leather focus mitt with red piping, the grey shield emblem on the striking face as in the drawing.

A flat technical drawing of a black focus mitt with red piping and a grey shield emblem on the striking face, beside its three colour swatches.

Your designYour mitt

Your colours
Send colour codes or a physical swatch. Colours are matched on the sample, and the approved sample is kept as the reference for reorders.
1 of 4
Your logo
Reproduced by DTF, heat transfer, screen print or sublimation — the method chosen for the shell and the design.
2 of 4
Your placement
On the striking face of a mitt or pad, the side of a bag or the strap of a shield, exactly where it sits on the mockup you approve.
3 of 4
Your sign-off
Bulk production starts only once you have approved the sample, and the finished order is checked against it.
4 of 4

Request a Free Mockup

After you send a brief

How an order for custom punch bags and pads runs, from brief to delivery.

The same five stages as every product line. You approve a physical sample before anything goes to bulk, and the approved sample is kept in the workshop so a reorder is matched to it.

Minimum order: 50 pieces per design; Any mix of sizes
Sample: 7–10 days; Free, with a free first revision
Bulk production: Typically 4–6 weeks; From sample approval, plus courier transit

Minimum 50 pieces per design, any mix of sizes. Free sample in 7–10 days. Bulk production typically 4–6 weeks from sample approval, plus courier transit — your exact dispatch date is confirmed in writing with your quote.

What is checked on custom punch bags and pads before dispatch

Every one of these is performed and recorded before the order leaves the workshop.

How each order is inspected against your sample

Striking face and padding density compared with the approved sample.
Hand compartments, forearm straps and handles checked for fit and stitching.
Punch bag size, panels and seams checked against the sample bag.
Chains, straps and D-rings checked on every hanging bag.
Logo on the face of a mitt or the side of a bag checked for placement and print.
Pairs and sets counted, and packed together as agreed.

Questions

Custom punch bags and pads — common questions

Choose a question and the answer comes back beside it.

Pads, bags and mitts

The Sparwright teamEvery brief is read by a person

Pads, bags and mitts

Can punch bags ship unfilled?

Bags can be specified filled or unfilled. Unfilled bags are much lighter to ship, which suits export orders; filled bags arrive ready to hang. We confirm the option with your quote.